SPECIAL METALS Inconel® 82 AWS A5.14 ERNiCr-3 1/8 Dia X 36 Filler Metal comes in a 10 lb package and is ideally designed for welding of INCONEL alloys 600/601/690, INCOLOY alloys 800/800HT, INCOLOY alloy 330 using gas tungsten arc, gas metal arc and submerged arc. Filler metal produces weld metals having high strength, good corrosion and oxidation resistance and has creep Aufhauser - Nickel Based Alloys(ERNiCr-3) MIG/TIG:Moderate creep service. Inconel alloy 600 and 601 and Incoloy 800 to themselves and to carbon and stainless steel. Inconel Alloy 686 and other Ni-Cr-Mo corrosion resisting alloys. Alloy clad steel. Overlaying on steel. The nominal composition of weld metal produced by this class is 57 Ni, 21 Cr, 16 Mo, 4 W. Welding Ni-Cr
S Ni 6082 (NiCr20Mn3Nb) ERNiCr-3 2.4806 . Characteristics and typical fields of application GTAW rod for welding of nickel-base alloys, high-temperature and creep resisting steels, heat resisting and cryogenic materials, low-alloyed problem steels and dissimilar joints. Ferritic- Casting Material:Precipitation-Hardening Stainless Steel ERNiCr-3 (alloy 82) wire to minimize notch sensitivity. Machining:Typical machining speeds for 17-4PH, using high speed steel tools are:Operation Speed Feed SFPM IPR Turning, 80-95 0.015-0.007 Single Point Drilling 1/4 dia 50 0.004 3/4 dia 50 0.008 Reaming under 1/2 60 0.003 over 1/2 60 0.008 ERNiCr-3 - Weld WireWeld WireERNiCr-3 (NA82) is used for welding Inconel alloy 600 and Incoloy 800, overlaying on steel and various dissimilar metal welding applications. Weld processes which
3/32 x 36 1/8 x 36. Application ERNiCrCoMo-1 is used for welding nickel-chromium-cobalt-molybdenum base material using both the gas tungsten arc and gas metal arc process. Also other cast heat-resisting alloy and dissimilar metals for high temperature service up to 2100º F. ERNiCu-7 - Weld WireWeld WireERNiCu-7 (NA60) is a copper-nickel alloy base wire for GMAW and GTAW welding of Monel alloys 400 and 404. Also used for overlaying steel after first applying Layer of 610 nickel. Deposited Chemical Composition % (Typical) ExocorERNiCr-3 Data Sheet SDS INCONEL Filler Metal 82 is used for gas-tungsten-arc, gas-metal-arc and submerged-arc welding of INCONEL alloys 600, 601 and 690, INCOLOY alloys 800 and 800HT, and INCOLOY alloy 330.
Alloy 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. Alloy 718 Alloy 718 is a high-strength, nickel-based superalloy made for long-term use in temperatures ranging from cryogenic up to 1200°F. High-performance tube materials for syngas coolersExcellent corrosion resistance The high-alloy stainless component (Sanicro 30) provides excellent protection against corrosive syngas. The gas is a mixture of CO, H 2, H 2 O, CO 2, N 2, HCl and H 2 S, which result in a reducing atmosphere. The low-alloy ferritic steel (Sandvik HT5), carrying the steam side Nickel & High nickel Alloys ERNiCr-3 Filler Wires The test is further approved as per industry standard and regulations. At the end, when all the tests are completed, these Nickel high nickel alloys ERNiCr 3 filler wire are packed in wooden cases or pallets which in turn help prevent rusting for a long time. Hence, you can buy these filler wires at the Shanti metal at an inexpensive rate.
Continuous solid Ni-Cr wire for welding of high alloyed heat-resisting and corrosion resisting materials, 9% Ni-steels and similar steels with high notch toughness at low temperatures. Also for joining of dissimilar metals of the types mentioned. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to stress corrosion. OK Tigrod NiCr-3Bare corrosion and heat-resisting Ni-Cr-Mo rods for welding of high alloyed heat-resisting and corrosion resisting materials, 9%Ni-steels and similar steels with high notch toughness at low temperatures. Also for joining of dissimilar metals of the types mentioned. The weld metal has very good mechanical properties at high and low temperatures. Registered User Login - Norco MedicalPinnacle Alloys ERNiCr-3 provides high strength and good corrosion resistance, resists oxidation and delivers creep-rupture strength at elevated temperatures Pinnacle Alloys ERNiCr-3 is ideal for welding in desalination plants because it is formulated to resist pitting corrosion and stress-corrosion cracking in chloride containing environments
Alloy:UNS:Specifications:AWS/ASME:AMS:Other:HAYNES® 25:R30605-AMS 5796-HAYNES® 82:N06082:SFA / A 5.14 (ERNiCr-3) AMS 5836-HAYNES® 188:R30188-AMS 5801 Weldability of Materials - Nickel and Nickel Alloys - TWIAlloy 718 alloy was specifically developed to be resistant to this type of cracking. Stress corrosion cracking. Welding does not normally make most nickel alloys susceptible to weld metal or HAZ corrosion. However, when Alloy 400 will be in contact with caustic soda, fluosilicates or HF acid, stress corrosion cracking is possible. Welding Products Corrosion MaterialsBase Metal:Bare Wire:Electrodes:Alloy:UNS No. AWS 5.14:UNS No. Welding Alloy:AWS 5.11:UNS No. Welding Alloy:Alloy C276:N10276:ERNiCrMo-4:N10276:C276
General Description. ERNiCr-3 is used for Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW) and Submerged Arc Welding (SAW) of Inconel 600, Inconel 601 and Inconel 690, Incoloy 800 and Incoloy 800HT.. Dissimilar welding applications include joining Inconel alloys, Incoloy alloys and Incoloy 330 to nickel, Monel alloys, stainless steels and carbon steels.